Skip to content
Inform
‹ The project pageThe project page

Your floor plan

Find your way around the floor plans

Once your project is Completed, the middle of the page shows the floor plans, every level on one view with its name over it. Drag to move around, and use the mouse wheel or pinch to zoom. Click a room to open its card in the property list. To show only one level, select it in the property list.

The bar over the plans

The floor plans, all levels
  1. The info button. Opens the scan's details.

  2. The plan switch, when you ordered both floor plans.

When the property has more than one building, or the project more than one scan, the bar also lets you pick one, and the whole page follows.

The property list and its cards

Once your project is Completed, the left column lists the property from the top down: the site, each building, and inside a building its dwelling units, levels and rooms. Click a row to open its card under it. Point at a row to find it on the plan.

The rows

The property list
  1. The property, with a summary of the main dwelling.

  2. Site, with the address.

  3. A building.

  4. A dwelling unit.

  5. A level. Select it to show only that level on the plan.

  6. The open level's card.

  7. A room. A hollow dot means it isn't in the room count.

The cards

A dwelling unit's card has an Area table with a row for each level and the total, Gross Living Area. On a GLA floor plan order, click that total to open the GLA audit.

A dwelling unit's card

A level's card holds its grade and its area. A room's card holds its name, type, finish, heat and label settings.

What you can change

You can change a room's name, its finish and whether it's heated, a level's grade, and each label: shown or hidden, its size and where it sits. On the marketing floor plan you can also adjust a room's printed dimensions. See Rename a room, Show, hide and adjust labels and room dimensions and Finish, heat, grade and the GLA audit.

You can't change a room's type, whether it's in the room count, or the walls and shapes. For those, request a change.

Rename a room

You can rename a room once the project is Completed.

Click the room in the list on the left, or on the plan, to open its card. Under General, type the new name in Name and press Enter.

A room's card in the property list

Renaming changes only the name: areas and the GLA stay the same. There's no undo, so to go back, type the old name again.

If the room is the wrong kind of room, you can't change its type here. Request a change and say what it should be.

Show, hide and adjust labels and room dimensions

You choose which room labels show on your floor plan, how big they are and where they sit, and on a marketing floor plan which rooms show their dimensions. Every download afterward includes your changes.

Labels

Select a room in the list on the left, or on the plan. On its card, Label on the plan shows or hides the label, and the minus and plus buttons beside Label size resize it; Auto lets the plan pick. Drag the label on the plan to move it. Reset puts it back the way it was drawn.

The label settings on a room's card

Room dimensions (marketing floor plan)

If you ordered both floor plans, switch to Marketing plan at the right end of the bar above the plan. The dimension controls work only there.

Select a room, then under Dimensions choose Shown or Hidden. To change the size printed for the room, drag a handle on the dashed box around it. Reset puts it back.

Room dimensions on the marketing floor plan

A GLA floor plan doesn't show room dimensions.

Finish, heat, grade and the GLA audit

A room's finish and heat, and a level's grade, can change the gross living area (GLA). You can set them yourself once the project is Completed. On a GLA floor plan order, the GLA audit shows how each room and level was counted.

Finish and heat

Select a room in the property list or on the plan, then set Finish and Heated under Characteristics.

A room's Characteristics

When a change moves the GLA, the card shows GLA change with the figure before and after.

Grade

Select a level and set Grade to Above grade or Below grade. Below grade, the level counts as finished area instead of GLA.

There's no undo for finish, heat or grade. To go back, set the old value again.

The GLA audit

On a GLA floor plan order, open a dwelling unit's card and click Gross Living Area, the total row of its Area table.

The GLA audit

The audit lists each level with its figure, and each room with the reason it counts toward GLA or doesn't, the rooms left out first. Use it to check a figure before you ask us to change anything.

On the GLA floor plan, each area is colored by how it counts. While the audit is open, a key in the plan's corner explains the colors.

Properties measured to the inside of the walls

For a property measured to the inside face of its walls, such as an apartment, the page says Area wherever it would say GLA.

If something goes wrong

If the GLA looks wrong, open the audit to see how each room was counted. If something needs changing that you can't set yourself, request a change. See also why a GLA or square footage can look wrong.

Still need help?

General questions
hello@inform.re
Customer service
help@inform.re