Skip to content
Inform
‹ Inform Scan on iPhone

Scanning

A scan from start to finish

A new scan starts from the round orange button on the Projects list and becomes a new project. You don't need to be signed in or online to scan.

  1. On Projects, tap the round orange button at the bottom right. If you have assigned projects waiting, pick one, or tap Scan a new project.

  2. Choose Advanced or Video only. See which to pick.

  3. The first time, allow the camera. Location is optional: without it the address stays blank and you add it yourself.

  4. Move the phone slowly until the record button appears.

  5. Tap the record button and walk the property. On an Advanced scan a mesh draws over the room as you go. See The scan screen.

  6. To take a snapshot as you go, tap the camera button. See Snapshots.

  7. When you've covered the property, tap the stop button, and keep the app open while the scan saves.

  8. After an Advanced scan, tap Make the 3D model and keep the app open for about a minute. The app calls the property preview the 3D model. See Make the 3D model on your iPhone.

    Make the 3D model now?
  9. Look around the property preview, then tap Done. The project reads Not uploaded until you order a floor plan.

A Video only scan goes the same way up to the stop button. Its property preview is made after you upload.

To scan a project that's already on the list as Assigned, tap Scan on its card. To add a scan to a project you already started, see Add or rename a scan.

Assigned projects

Assigned projects are set up for you on the web or by a system your company uses. When you tap the round orange button, a sheet lists the ones that haven't been scanned yet: tap one to scan it, or Scan a new project.

Advanced or Video only

On an iPhone that offers it, you choose between two kinds of scan. Both get you the same floor plan.

Advanced. A mesh builds over the room as you scan. When you stop, your iPhone makes the property preview itself, so you can look around it before you upload. You keep the app open for about a minute while it's made, and you can pick the scan up again later with Continue scan.

Video only. You see the plain camera view. There's nothing to wait for when you stop: the property preview is made after you upload.

Which to use

Use Advanced for most properties. Use Video only for a large property or a lot of outdoor capture, and on a phone that keeps getting too hot.

Advanced needs an iPhone 14 Pro or newer, or an iPad Pro with M1 or newer. Every other iPhone and iPad scans in Video only and never sees the choice. See which devices work with Inform Scan.

Choose a scan mode

The app asks on every new scan, unless you've turned Advanced scanning off in your account. With it off, every scan is Video only. When the phone is too hot, Advanced is dimmed and Video only still works.

The scan screen

The scan screen is the camera view you record with. There's no pause button: you record until you tap stop.

The scan screen while an Advanced scan records
  1. Back. While you record, it asks before it discards the scan.

  2. The recording time.

  3. A hint. The recording carries on while it shows.

  4. The mesh, on an Advanced scan.

  5. The kind of scan you're making.

  6. The flashlight. Each tap steps through Auto, On and Off.

  7. Stop. Before you record, this is the record button.

  8. The camera button. Takes a snapshot.

Before you can record, the screen gets the phone ready: move it slowly, then hold it still, until the record button appears.

A Video only scan has no mesh and no hints, and shows a frame count at the top right while you record.

Finish or discard a scan

Tap the stop button to finish. The scan is saved on your phone and you're taken to the project.

Discard a scan

While you're recording, tap back, then Discard scan. What you recorded is deleted, and that can't be undone.

Scan a space again

Scan again, on a scan's card or in a message about a scan, records that scan over. The new recording replaces the old one on this phone and keeps its name.

If something goes wrong with a scan

Space and heat

When your phone is low on space, free some with Free up space in your account, then start again. If space runs out while you record, the recording stops and what you recorded is kept.

A hot phone has to cool before it can scan well. Let it rest for a few minutes; anything you recorded is kept. If it keeps happening, scan in Video only.

If this phone can't scan at all, see which devices work with Inform Scan.

A scan with a problem

After a Video only scan, the app checks what was recorded.

This scan has errors

If the scan has errors, you choose. Scan again records it over, while you're still at the property. Upload as it is keeps it, and processing may take longer.

If the scan can't be used, there's nothing to process, so scan it again. Until you do, it reads Needs a rescan and the project can't be uploaded.

Still need help?

General questions
hello@inform.re
Customer service
help@inform.re